Product Details
Place of Origin: Jiangsu, China
Brand Name: Lianti
Certification: ISO9001
Model Number: KDW-3582(1:1)
Payment & Shipping Terms
Minimum Order Quantity: 1.0 Barrels
Packaging Details: 25KG/drum; etc.
Features: |
High Thermal Conductivity |
CAS No.: |
63148-60-7 |
Other Names: |
Silicone Sealant |
EINECS No.: |
Unspecified |
Place Of Origin: |
Jiangsu, China |
Classification: |
Double Components Adhesives |
Main Raw Material: |
Silicone |
Usage: |
Eletronics |
Brand Name: |
Lianti |
Model Number: |
KDW-3582(1:1) |
Type: |
Additional |
Application: |
Eletronics |
Certificate: |
ISO9001 |
Color: |
White/Gray |
Appearance: |
Paste |
Packaging: |
25KG |
Viscosity: |
Low Viscosity |
Shelf Life: |
1 Year |
Features: |
High Thermal Conductivity |
CAS No.: |
63148-60-7 |
Other Names: |
Silicone Sealant |
EINECS No.: |
Unspecified |
Place Of Origin: |
Jiangsu, China |
Classification: |
Double Components Adhesives |
Main Raw Material: |
Silicone |
Usage: |
Eletronics |
Brand Name: |
Lianti |
Model Number: |
KDW-3582(1:1) |
Type: |
Additional |
Application: |
Eletronics |
Certificate: |
ISO9001 |
Color: |
White/Gray |
Appearance: |
Paste |
Packaging: |
25KG |
Viscosity: |
Low Viscosity |
Shelf Life: |
1 Year |
Kangdawei electronics potting high thermal conductivity silicone rtv adhesive compound with high quality
KDW-3582(1:1) is used on all kinds of componets of potting sealing and protection. It can be deeply cured, and with good liquidity, UV resistance, weather resistance, rain resistance and dirt resistance after mixed. And it can serve for a long time on outdoor products of fixation, waterproof, dustproof and anticreep.
1. Two components silicone pouring compound, additional type
2. Low viscosity, easy to process, strong maneuverability
3. Low shrinkage rate, no corrosion, no stress
4. Excellent high temperature electrical insulation, thermal conductivity and stability
5. Good waterproof and dampproof performance
1. Weighing component A and B according to the ratio of 1:1, stirring evenly after mixed, then inject it to components and module which needed to be potting protected. It would be better to injected along one side of the wall, which can reduce the generation of air bubbles.
2. Placing the sealed component, and it would discharge bubbles by itself, if possible, vacuumizing and defoaming the mixed rubber before potting sealing. Directly cured at room temperature, usually the rubber will have elasticity within 1-6 hours.
